APC Smart-UPS VT rack mounted 30kVA 400V w/5 batt mod., w/PDU & startup – SUVTR30KH5B5S
APC Smart-UPS VT rack mounted 30kVA 400V w/5 batt mod., w/PDU & startup – SUVTR30KH5B5S
Overview
SUVTR30KH5B5SFeatures
APC Smart-UPS VT rack mounted 30kVA 400V w/5 batt mod., w/PDU & startup
- Field-replaceable power distribution panelEnsures compatibility with equipment that has different plug types.
- Locking cabinetPrevents unauthorized access to the UPS.
- Multiple cable-entry pointsProvides flexibility of UPS placement in the room and easy access to install cabling to the terminal blocks.
- Resettable circuit breakersEnables a quick recovery from overload events.
Smart-UPS VTFeatures & Benefits
Serviceability
- Automatic self-testPeriodic battery self-test ensures early detection of a battery that needs to be replaced.
- Battery replacement without toolsEnables fast battery replacement, lowering Mean Time to Repair (MTTR).
- Modular designProvides fast serviceability and reduced maintenance requirements via self-diagnosing, field-replaceable modules.
- Shippable with modules installedEnables pre-installation UPS staging and testing and faster installation.
Marketing Features
- Network manageableProvides remote power management of the UPS over the network.
- Input power factor correctionMinimizes installation costs by enabling the use of smaller generators and cabling.
- Hot-swappable batteriesEnsures clean, uninterrupted power to protected equipment while batteries are being replaced
- Scalable runtimeAllows additional run time to be quickly added as needed.
- Dual mains inputIncreases availability by allowing the UPS to be connected to two separate power sources.
- Manual maintenance bypassReduces installation costs by eliminating the need for an external mechanical bypass.
Sustainability
- EU CoC for UPSEnsures that UPSs sold in the EU are highly efficient
Availability
- Battery modules connected in parallelDelivers higher availability through redundant batteries.
- Automatic internal bypassSupplies utility power to the connected loads in the event of a UPS power overload or fault.
- Dual mains inputIncreases availability by allowing the UPS to be connected to two separate power sources.
- Scalable runtimeAllows additional run time to be quickly added as needed.
- Generator compatibleEnsures clean, uninterrupted power to protected equipment when generator power is used.
Manageability
- SmartSlotCustomize UPS capabilities with management cards.
- LED status indicatorsQuickly understand unit and power status with visual indicators.
- LCD displayAlpha-Numeric Display which displays system parameters and alarms.
- Audible alarmsProvides notification of changing utility power and UPS power conditions
- InfraStruXure Manager CompatibleEnables centralized management via the APC InfraStruXure Manager.
- Network manageableProvides remote power management of the UPS over the network.
- Programmable frequencyEnsures compatibility with different input frequencies.
Total Cost of Ownership
- Intelligent battery managementMaximizes battery performance, life, and reliability through intelligent, precision charging.
- Manual maintenance bypassReduces installation costs by eliminating the need for an external mechanical bypass.
- Temperature-compensated battery chargingProlongs battery life by regulating the charge voltage according to battery temperature.
- Input power factor correctionMinimizes installation costs by enabling the use of smaller generators and cabling.
Protection
- Cold-start capableProvides temporary battery power when the utility power is out.
- Safety-agency approvedEnsures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
- Frequency and voltage regulationGives higher application availability by correcting poor frequency and voltage conditions without using the battery.
Detailed Tech Specification
Output
- Output power capacity
24.0 KWatts / 30.0 kVA
- Max Configurable Power (Watts)
24.0 KWatts / 30.0 kVA
- Nominal Output Voltage
400V 3PH
- Output Voltage Note
Configurable for 380 : 400 or 415 V 3 Phase nominal output voltage
- Efficiency at Full Load
96.4 %
- Output Voltage Distortion
Less than 5% at full load
- Output Frequency (sync to mains)
47 – 53 Hz for 50 Hz nominal
- Output Frequency (not synced)
50Hz +/- 0.1% for 50Hz nominal
- Other Output Voltages
380, 415
- Load Crest Factor
Unlimited
- Topology
Double Conversion Online
- Waveform type
Sine wave
- Overload Operation
60 seconds @ 125% and 30 seconds @ 150%
- Maximum Output Current
48
- Output Connections(12) IEC 320 C19 (Battery Backup)
- Bypass
Built-in Maintenance Bypass, Built-in Static Bypass
Input
- Nominal Input Voltage
400V 3PH
- Input frequency
40 – 70 Hz
- Input Connections
Hard Wire 5-wire (3PH + N + G)
- Input voltage range for main operations
304 – 477V
- Efficiency at Full Load
96.4 %
- Other Input Voltages
380, 415
- Maximum Input Current
41.0A
- Input Power Factor at Full Load
0.98
Batteries & Runtime
- Battery type
VRLA
- Included Battery Modules
5
- Typical recharge time
3hour(s)
- Replacement Battery
- Expected Battery Life (years)
3 – 5
- RBC Quantity
5
- Extended Run Options
APC-Smart-UPS-VT-rack-mounted-30kVA-400V-w-5-batt-mod-w-PDU-startup
- Runtime
Communications & Management
- Interface Port(s)
DB-9 RS-232 , SmartSlot
- Pre-Installed SmartSlot™ Cards
- Control panel
Multi-function LCD status and control console
- Audible Alarm
Audible and visible alarms : configurable delays
- Emergency Power Off (EPO)
Yes
Physical
- Maximum Height
1995mm , 199.5CM
- Maximum Width
600mm , 60.0CM
- Maximum Depth
1075mm , 107.5CM
- Net Weight
340.45KG
- Shipping weight
873.18KG
- Shipping Height
2095mm , 209.5CM
- Shipping Width
756mm , 75.6CM
- Shipping Depth
1206mm , 120.6CM
- Color
Black
Environmental
- Operating Temperature
0 – 40 °C
- Operating Relative Humidity
0 – 95 %
- Operating Elevation
0-999.9meters
- Storage Temperature
-50 – 40 °C
- Storage Relative Humidity
0 – 95 %
- Storage Elevation
0-15000meters
- Audible noise at 1 meter from surface of unit
67.0dBA
- Online thermal dissipation
3685.0BTU/hr
- Protection Class
IP 20