APC Smart-UPS VT rack mounted 30kVA 208V w/ISO XFMR w/3 batt mod. exp. to 5, w/PDU & startup – SUVTRT30KF3B5S
AED68,051.00
In stock
SKU
SUVTRT30KF3B5S
APC Smart-UPS VT rack mounted 30kVA 208V w/ISO XFMR w/3 batt mod. exp. to 5, w/PDU & startup – SUVTRT30KF3B5S
Product Category; Uninterruptible Power Supply (UPS)
Product Family; Smart-UPS VT
Input Voltage; 208 3PH
Output Voltage; 120, 208, 208 3PH
Overview
SUVTRT30KF3B5S Features
APC Smart-UPS VT rack mounted 30kVA 208V w/ISO XFMR w/3 batt mod. exp. to 5, w/PDU & startup
- Field-replaceable power distribution panelEnsures compatibility with equipment that has different plug types.
- Locking cabinetPrevents unauthorized access to the UPS.
- Multiple cable-entry pointsProvides flexibility of UPS placement in the room and easy access to install cabling to the terminal blocks.
- Resettable circuit breakersEnables a quick recovery from overload events.
Smart-UPS VTFeatures & Benefits
Serviceability
- Automatic self-testPeriodic battery self-test ensures early detection of a battery that needs to be replaced.
- Battery replacement without toolsEnables fast battery replacement, lowering Mean Time to Repair (MTTR).
- Modular designProvides fast serviceability and reduced maintenance requirements via self-diagnosing, field-replaceable modules.
- Shippable with modules installedEnables pre-installation UPS staging and testing and faster installation.
Marketing Features
- Network manageableProvides remote power management of the UPS over the network.
- Input power factor correctionMinimizes installation costs by enabling the use of smaller generators and cabling.
- Hot-swappable batteriesEnsures clean, uninterrupted power to protected equipment while batteries are being replaced
- Scalable runtimeAllows additional run time to be quickly added as needed.
- Dual mains inputIncreases availability by allowing the UPS to be connected to two separate power sources.
- Manual maintenance bypassReduces installation costs by eliminating the need for an external mechanical bypass.
Sustainability
- EU CoC for UPSEnsures that UPSs sold in the EU are highly efficient
Availability
- Battery modules connected in parallelDelivers higher availability through redundant batteries.
- Automatic internal bypassSupplies utility power to the connected loads in the event of a UPS power overload or fault.
- Dual mains inputIncreases availability by allowing the UPS to be connected to two separate power sources.
- Scalable runtimeAllows additional run time to be quickly added as needed.
- Generator compatibleEnsures clean, uninterrupted power to protected equipment when generator power is used.
Manageability
- SmartSlotCustomize UPS capabilities with management cards.
- LED status indicatorsQuickly understand unit and power status with visual indicators.
- LCD displayAlpha-Numeric Display which displays system parameters and alarms.
- Audible alarmsProvides notification of changing utility power and UPS power conditions
- InfraStruXure Manager CompatibleEnables centralized management via the APC InfraStruXure Manager.
- Network manageableProvides remote power management of the UPS over the network.
- Programmable frequencyEnsures compatibility with different input frequencies.
Total Cost of Ownership
- Intelligent battery managementMaximizes battery performance, life, and reliability through intelligent, precision charging.
- Manual maintenance bypassReduces installation costs by eliminating the need for an external mechanical bypass.
- Temperature-compensated battery chargingProlongs battery life by regulating the charge voltage according to battery temperature.
- Input power factor correctionMinimizes installation costs by enabling the use of smaller generators and cabling.
Protection
- Cold-start capableProvides temporary battery power when the utility power is out.
- Safety-agency approvedEnsures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
- Frequency and voltage regulationGives higher application availability by correcting poor frequency and voltage conditions without using the battery.
Technical Specifications
Output | ||
Output Power Capacity | 24.0 KW / 30.0 kVA | |
Max Configurable Power (Watts) | 24.0 KW / 30.0 kVA | |
Nominal Output Voltage | 120V , 208V , 208 3PH | |
Output Voltage Note | Configurable for 200 : 208 or 220V 3 Phase nominal output voltage | |
Output Voltage Distortion | Less than 5% at full load | |
Output Frequency (sync to mains) | 57 – 63 Hz for 60 Hz nominal | |
Other Output Voltages | 220V | |
Crest Factor | Unlimited | |
Double Conversion Online | ||
Waveform Type | Sine wave | |
Output Connections | (1) Hard Wire 5-wire (3PH + N + G) (Battery Backup) , (5) NEMA L21-20 (Battery Backup) | |
Bypass | Built-in Maintenance Bypass , Built-in Static Bypass |
Input | ||
Nominal Input Voltage | 208 3PH | |
Input Frequency | 40 – 70 Hz | |
Input Connections | Hard Wire 5-wire (3PH + N + G) | |
Input voltage range for main operations | 177 – 239 (208V) V | |
Other Input Voltages | 220 | |
Maximum Input Current | 0 A | |
Input Breaker Capacity | 0 A |
Batteries & Runtime | ||
Battery Type | VRLA | |
Included Battery Modules | 3 | |
Battery Slots Empty | 2 | |
Typical recharge time | 3 hour(s) | |
Replacement Battery | SYBT4 | |
RBC Quantity | 3 | |
Nominal Battery Voltage | +/-192 V (split battery referenced to neutral) |
Communications & Management | ||
Interface Port(s) | SmartSlot | |
Available SmartSlot™ Interface Quantity | 0 | |
Pre-Installed SmartSlot™ Cards | AP9631 | |
Control panel | Multi-function LCD status and control console | |
Audible Alarm | Audible and visible alarms : configurable delays | |
Emergency Power Off (EPO) | Optional |
Physical | ||
Maximum Height | 1995.0 mm | |
Maximum Width | 600.0 mm | |
Maximum Depth | 1075.0 mm | |
Rack Height | 0 U | |
Net Weight | 859.09 kg | |
Shipping Weight | 894.09 kg | |
Shipping Height | 1995.0 mm | |
Shipping Width | 600.0 mm | |
Shipping Depth | 1075.0 mm | |
Master Carton Units | 0.0 | |
Master Carton Weight | 0.0 lbs | |
Color | Black | |
Units per Pallet | 0.0 |
Environmental | ||
Operating Environment | 0 – 40 °C | |
Operating Relative Humidity | 0 – 95 % | |
Operating Elevation | 0-999.9 meters | |
Storage Temperature | -50 – 40 °C | |
Storage Relative Humidity | 0 – 95 % | |
Storage Elevation | 0-15000 meters | |
Audible noise at 1 meter from surface of unit | 58.000 dB | |
Online Thermal Dissipation | 6305.000 BTU/hr | |
Protection Class | NEMA 1 |
Conformance | ||
Approvals | ISO 14001 , ISO 9001 , UL 1778 , cUL Listed | |
Standard warranty | 1 year repair or replace |
Write Your Own Review