APC Smart-UPS VT 20kVA 208V w/2 Batt Mod Exp to 4, Start-Up 5X8, Int Maint Bypass, Parallel Capable – SUVTP20KF2B4S
APC Smart-UPS VT 20kVA 208V w/2 Batt Mod Exp to 4, Start-Up 5X8, Int Maint Bypass, Parallel Capable – SUVTP20KF2B4S
Overview
SUVTP20KF2B4SFeatures
APC Smart-UPS VT 20kVA 208V w/2 Batt Mod Exp to 4, Start-Up 5X8, Int Maint Bypass, Parallel Capable
- Parallel-capacity capableIncreases total power capacity by using multiple uninterruptible power supplies simultaneously.
- Parallel-redundant capablePower the connected equipment with multiple uninterruptible power supplies to increase system redundancy
Smart-UPS VTFeatures & Benefits
Serviceability
- Automatic self-testPeriodic battery self-test ensures early detection of a battery that needs to be replaced.
- Battery replacement without toolsEnables fast battery replacement, lowering Mean Time to Repair (MTTR).
- Modular designProvides fast serviceability and reduced maintenance requirements via self-diagnosing, field-replaceable modules.
- Shippable with modules installedEnables pre-installation UPS staging and testing and faster installation.
Marketing Features
- Network manageableProvides remote power management of the UPS over the network.
- Input power factor correctionMinimizes installation costs by enabling the use of smaller generators and cabling.
- Hot-swappable batteriesEnsures clean, uninterrupted power to protected equipment while batteries are being replaced
- Scalable runtimeAllows additional run time to be quickly added as needed.
- Dual mains inputIncreases availability by allowing the UPS to be connected to two separate power sources.
- Manual maintenance bypassReduces installation costs by eliminating the need for an external mechanical bypass.
Sustainability
- EU CoC for UPSEnsures that UPSs sold in the EU are highly efficient
Availability
- Battery modules connected in parallelDelivers higher availability through redundant batteries.
- Automatic internal bypassSupplies utility power to the connected loads in the event of a UPS power overload or fault.
- Dual mains inputIncreases availability by allowing the UPS to be connected to two separate power sources.
- Scalable runtimeAllows additional run time to be quickly added as needed.
- Generator compatibleEnsures clean, uninterrupted power to protected equipment when generator power is used.
Manageability
- SmartSlotCustomize UPS capabilities with management cards.
- LED status indicatorsQuickly understand unit and power status with visual indicators.
- LCD displayAlpha-Numeric Display which displays system parameters and alarms.
- Audible alarmsProvides notification of changing utility power and UPS power conditions
- InfraStruXure Manager CompatibleEnables centralized management via the APC InfraStruXure Manager.
- Network manageableProvides remote power management of the UPS over the network.
- Programmable frequencyEnsures compatibility with different input frequencies.
Total Cost of Ownership
- Intelligent battery managementMaximizes battery performance, life, and reliability through intelligent, precision charging.
- Manual maintenance bypassReduces installation costs by eliminating the need for an external mechanical bypass.
- Temperature-compensated battery chargingProlongs battery life by regulating the charge voltage according to battery temperature.
- Input power factor correctionMinimizes installation costs by enabling the use of smaller generators and cabling.
Protection
- Cold-start capableProvides temporary battery power when the utility power is out.
- Safety-agency approvedEnsures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
- Frequency and voltage regulationGives higher application availability by correcting poor frequency and voltage conditions without using the battery.
Detailed Tech Specification
Output
- Output power capacity
16.0 KWatts / 20.0 kVA
- Max Configurable Power (Watts)
16.0 KWatts / 20.0 kVA
- Nominal Output Voltage
120V , 208V , 208V 3PH
- Output Voltage Note
Configurable for 208 and 220V – 3 Phase
- Efficiency at Full Load
93.8 %
- Output Voltage Distortion
Less than 5% at full load
- Output Frequency (sync to mains)
57 – 63 Hz for 60 Hz nominal
- Output Frequency (not synced)
60Hz +/- 0.1% for 60Hz nominal
- Other Output Voltages
220
- Load Crest Factor
Unlimited
- Topology
Double Conversion Online
- Waveform type
Sine wave
- Maximum Output Current
61
- Bypass
Built-in Maintenance Bypass, Built-in Static Bypass
Input
- Nominal Input Voltage
208V 3PH
- Input frequency
40 – 70 Hz
- Input Connections
Hard Wire 5-wire (3PH + N + G)
- Input voltage range for main operations
165 – 240V
- Efficiency at Full Load
93.8 %
- Other Input Voltages
220
- Maximum Input Current
53.0A
- Input Power Factor at Full Load
0.98
Batteries & Runtime
- Battery type
VRLA
- Included Battery Modules
2
- Typical recharge time
5hour(s)
- Nominal Battery Voltage
+/-192 V (split battery referenced to neutral)
- Battery Slots Empty
2
- Expected Battery Life (years)
3 – 5
- RBC Quantity
2
- Extendable Run Time
1
- Extended Run Options
APC-Smart-UPS-VT-20kVA-208V-w-2-Batt-Mod-Exp-to-4-Start-Up-5X8-Int-Maint-Bypass-Parallel-Capable
- End of Discharge Battery Voltage
+/-154 V
Communications & Management
- Interface Port(s)
DB-9 RS-232 , Smart-Slot
- Pre-Installed SmartSlot™ Cards
- Control panel
Multi-function LCD status and control console
- Audible Alarm
Audible and visible alarms : configurable delays
- Emergency Power Off (EPO)
Yes
Physical
- Maximum Height
1499mm , 149.9CM
- Maximum Width
523mm , 52.3CM
- Maximum Depth
813mm , 81.3CM
- Net Weight
445.0KG
- Shipping weight
475.91KG
- Shipping Height
1643mm , 164.3CM
- Shipping Width
650mm , 65.0CM
- Shipping Depth
1062mm , 106.2CM
- Color
Black
- Units per Pallet
1.0
Environmental
- Operating Temperature
0 – 40 °C
- Operating Relative Humidity
0 – 95 %
- Operating Elevation
0-999.9meters
- Storage Temperature
-50 – 40 °C
- Storage Relative Humidity
0 – 95 %
- Storage Elevation
0-15000meters
- Audible noise at 1 meter from surface of unit
55.0dBA
- Online thermal dissipation
4238.0BTU/hr
- Protection Class
NEMA 1