APC Power-Saving Back-UPS ES 8 Outlet 700VA 230V CEE 7/7 – BE700G-RS
APC Power-Saving Back-UPS ES 8 Outlet 700VA 230V CEE 7/7 – BE700G-RS
Overview
BE700G-RS Features
APC Power-Saving Back-UPS ES 8 Outlet 700VA 230V CEE 7/7
- Adjustable voltage sensitivityProvides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.
- Audible alarmsProvides notification of changing utility power and UPS power conditions
- Automatic self-testPeriodic battery self-test ensures early detection of a battery that needs to be replaced.
- Battery failure notificationProvides early-warning fault analysis on batteries enabling timely preventive maintenance
- Battery replacement without toolsEnables fast battery replacement, lowering Mean Time to Repair (MTTR).
- Battery-protected and surge-only outletsReserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment
- Cold-start capableProvides temporary battery power when the utility power is out.
- Dataline surge protectionProvides protection of connected equipment from power surges on the data lines.
- Hot-swappable batteriesEnsures clean, uninterrupted power to protected equipment while batteries are being replaced
- Safety-agency approvedEnsures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
- USB connectivityProvides management of the UPS via a USB port (not available on all models).
- User-replaceable batteriesIncreases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
Back-UPS Features & Benefits
Marketing Features
- Battery-protected and surge-only outletsReserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment
Safety
- Safety-agency approvedEnsures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
Protection
- Battery and surge protected outletsBack up and protect your hardware and data during power outages, surges and spikes.
- Surge only outletsProtect secondary electronics from surges and spikes without reducing battery power used to run primary electronics during an outage.
Manageability
- LED status displayQuickly understand unit and power status with visual indicators.
- Audible alarmsProvides notification of changing utility power and UPS power conditions
Availability
- Intelligent battery managementMaximizes battery performance, life, and reliability through intelligent, precision charging.
- Automatic self-testPeriodic battery self-test ensures early detection of a battery that needs to be replaced.
- Battery failure notificationProvides early-warning fault analysis on batteries enabling timely preventive maintenance
Detailed Tech Specification
Output
- Output power capacity
405Watts / 700VA
- Max Configurable Power (Watts)
405Watts / 700VA
- Nominal Output Voltage
230V
- Output Frequency (sync to mains)
47 – 63 Hz
- Other Output Voltages
220
- Topology
Standby
- Waveform type
Stepped approximation to a sinewave
- Output Connections(4) Schuko CEE 7 (selector_surgetitle)(4) Schuko CEE 7 (Battery Backup)
- Output Voltage Tolerance
+/- 5% static and 100% load step
- Transfer Time
6ms typical : 10ms maximum
Input
- Nominal Input Voltage
230V
- Input frequency
50/60 Hz +/- 5 Hz (auto sensing)
- Cord Length
1.83meters
- Input voltage range for main operations
180 – 266V
- Input voltage adjustable range for mains operation
160 – 278V
- Maximum Input Current
10.0A
Batteries & Runtime
- Battery type
Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
- Typical recharge time
16hour(s)
- Replacement Battery
- Expected Battery Life (years)
3 – 5
- Runtime
- Efficiency
Communications & Management
- Interface Port(s)
Optional Simple Signalling RS232 cable , USB
- Control panel
LED status display with On Line : On Battery : Replace Battery and Overload indicators
Surge Protection and Filtering
- Surge energy rating
310Joules
- Data Line Protection
Analog phone line for phone/fax/modem/DSL (RJ-11 connector), Network line – 10/100 Base-T Ethernet (RJ-45 connector)
- Filtering
Full time multi-pole noise filtering : 5% IEEE surge let-through : zero clamping response time : meets UL 1449
Physical
- Maximum Height
89mm , 8.9CM
- Maximum Width
224mm , 22.4CM
- Maximum Depth
311mm , 31.1CM
- Net Weight
6.93KG
- Shipping weight
7.84KG
- Shipping Height
127mm , 12.7CM
- Shipping Width
279mm , 27.9CM
- Shipping Depth
400mm , 40.0CM
- Color
Black
- Master Carton Dimensions (Length x Width x Height)
324mm
- Master Carton Units
2.0
- Master Carton Weight
16.36
- Pallet Dimensions
48inches
- # of Layers per Pallet
4.0
- # of Units per Layer per Pallet
20.0
- Pallet Weight
1400.0lbs.
- Units per Pallet
48.0
- SCC Codes
1073130427165 6
Environmental
- Operating Temperature
0 – 40 °C
- Operating Relative Humidity
0 – 95 %
- Operating Elevation
0-9000meters
- Storage Temperature
-15 – 40 °C
- Storage Relative Humidity
0 – 95 %
- Storage Elevation
0-9000meters
- Audible noise at 1 meter from surface of unit
40.0dBA
Conformance
Approvals
Equipment protection policy
Standard warranty
Sustainable Offer Status
RoHS
REACH
PEP
EOLI